M.2 Dual-Bay Duplicator can not only be used as general external SSD Reader/Writer, but also as an Offline M.2 SATA/NVMe Duplicator to clone data between Two SSDs by one-click without a computer
M.2 Dual-Bay Duplicator is easily operated. Step: 1.Connect the DC Power Adapter after Source SSD (into Right Slot) and Target SSD ( into Left Slot) Inserted (Source SSD less than Target) 2. Press "Start" Button for about 3-5 seconds till all of the "Percent Progress Indicators" flash simultaneously, release the Botton. 3. Then re-click the Botton again, the percent process indicators flash sequentially, Clone will start 4. after all four progress indicators on, Clone is completed
M.2 Dual-Bay Duplicator Supports most of M.2 SATA/M key NVMe SSD.
Please Note: 1. The Temperature of the entire Operating SSD may exceed 60 ° C. Please do not touch the SSD. 2. It can NOT support "Hot-Plugging". Please don't exchange the SSDs when connecting 3. Please make sure the capacity of source SSD is less than Target SSD 4. If Clone is interrupted, please clone again

M.2 Dual-Bay Offline Duplicator Cloner USB C to NVME SATA Docking Station

Qty

Write a review